robotic slam
This document is about geting the Gerber & Excellon Files needed to use in flatcam to generate the gcode files formilling PCB milling in 3018 CNC with Candle or GRBL-control. We should use the LabeE.dru file that is available on the link bellow. LabE – eagle – design rules (dru) and library (lbr) These design rules …
Software (linux) Candle https://github.com/Denvi/Candle https://github.com/Denvi/Candle/releases/tag/v1.0 (old grbl firmware) Install candle linux ubuntu 20.04 ORIGINAL —————————————- Z-probe commands G91G21; G38.2Z-30F100; G0Z1; G38.2Z-1F10 G91G21G38.2Z-50F100; G92 Z0; G0Z5M30 G38.2 Z-1 F1; G92 Z0 FlatCam http://flatcam.org/ git clone https://bitbucket.org/jpcgt/flatcam Install Flatcam linux ubuntu 20.04 set_sys excellon_zeros T http://flatcam.org/manual/index.html http://flatcam.org/tutorial/selective https://altrish.co.uk/wp-content/uploads/2021/02/flatcam-and-milling-pcbs-2021.pdf ( Local copy flatcam-and-milling-pcbs-2021 ) FlatCAM pratica tutorial: introduction, installation and …